Literature, seminars and industry links
Full Line Catalog
Flyers
- American Petroleum Institute
- Axial Blade Replacement
- Biomass & Incineration
- Cement
- Coal Mill Exhauster Fans
- Construction Services
- Dampers
- Dust Collector Parts
- Heavy Industrial
- High Temperature NASA 398 Alloy
- Jet Fan Typical Data
- Jet Fan Typical Data (Metric)
- On-Site Energy Auditing Services
- Power Generation
- Tunnel Ventilation
Fan Engineering Topics
- AXIAL FAN CONNECTIONS
- APPLICATION GUIDE FOR SELECTING AC MOTORS CAPABLE OF OVERCOMING FAN INERTIA
- DENSITY CORRECTIONS FOR MOIST AIR AND OTHER GASES
- Direct Drive Fan Selections
- Fan & Fan System Vibration
- Fan Arrangements, Rotation, Discharge & Motor Position
- FAN BEARING MAINTENANCE & TROUBLESHOOTING
- FAN BEARING SELECTION
- FAN DAMPER SELECTION
- FAN PERFORMANCE CHARACTERISTICS OF AXIAL FANS
- FAN PERFORMANCE CHARACTERISTICS OF CENTRIFUGAL FANS
- Fan Performance Troubleshooting Guide
- Fan Sound & Sound Ratings
- FIELD TESTING OF FANS
- High Temperature Fans
- HOW TO AVOID PROBLEMS WITH YOUR FAN
- Improvements in Fan Performance Rating Methods for Air & Sound
- Integral AC Motor Selection and Application Guide for Fans
- MOTOR CLASSIFICATIONS
- MOTOR PERFORMANCE CHARACTERISTICS AND APPLICATION GUIDELINES
- MOTOR STANDARDS FOR THE CHEMICAL PROCESS INDUSTRY
- PRESSURE LOSSES FROM FAN ACCESSORIES
- SAFETY AGENCY LISTING
- SEALING OF FAN HOUSINGS
- Single-Phase AC Induction Squirrel Cage Motors
- SPARK RESISTANT FAN CONSTRUCTION
- Speed Control for Fractional Horsepower Motors
- SURGE, STALL AND INSTABILITIES IN FANS
- TEMPERATURE & ALTITUDE EFFECTS ON FANS
- TEMPERATURE & ALTITUDE EFFECTS ON FANS (METRIC)
- The Use of Fans in Pneumatic Conveying
- Topics in Acoustics
- Turning Gear & Component Selection Guidelines
- UNDERSTANDING FAN CURVES
- Variable Frequency Drive (VFD) Induced AC Motor Shaft Current and Bearing Damage
- V-Belt Drive Selection for Fans
- VIBRATION ISOLATION OF FANS
- VFDs for Fans, A Practical Guide – White Paper
Engineering Seminars
Fan Engineering I: The Basics
- Day 1, February 21:
- Fundamentals of airflow, fans and duct systems
- Selecting the right fan
- Balance and vibration
- Fan sound
- Day 2, February 22:
- Fan system effects
- Test Lab tour
- Fan installation, operation and maintenance
- Coatings and paint
Note: If you plan to attend both days, please be sure to register for both events.
Fan Engineering II: Advanced
- Rotor dynamics
- FEA and fatigue
- Structural and performance testing of fans
- Aerodynamic design and performance of fans
- Materials of construction
- Non-destructive examination
- Fan sound and noise
- Vibration
- Bearings and couplings
- Prime movers
- Flow control methods and devices
- Turning gear and thermal limit
- Rotor replacement and aftermarket upgrades
Industry Links
- ASME – American Society of Mechanical Engineers
- AWS – American Welding Society
- ABMA – American Boiler Manufacturers Association
- API – American Petroleum Institute
- AIST – Association of Iron & Steel Technology
- ABMA – American Bearing Manufacturers Association
- AMCA – Air Movement and Control Association
- ASHRAE – American Society of Heating, Refrigeration & Air Conditioning Engineers
- ISO – International Organization for Standardization
- NFPA – National Fire Protection Association
- NSF – National Safety Foundation
- OSHA – Occupational Safety & Health Administration
